Nemox's PRO series coffee machines offer professional users (restaurants, coffee shops, pastry shops, and business offices) reliable and versatile machines that are affordable and easy to use.
The various models available allow the use of ground coffee, pods, or capsules. 
With the Nemox Pro machines, you can switch from using pods to ground coffee in only 30 seconds by changing the group head . With our special kit,  this simple operation can be easily carried out by the user. 

From cold-start, the machine can dispense coffee, warm water, or steam in about 2 minutes. 
Every brew group section is completely independent, and features a dedicated heating element, pump, and operation controls.  Each brew group section can be operated independently, based on need, resulting in considerable energy savings. 
The machine has a large capacity water tank (filtered water usage is recommended to avoid any problems due to water scale build-up within the machine components).
The control panel has a low-water-level light signal that is activated before the water tank is empty.  After the signal comes on, the machine will not operate until the water tank is refilled. This electromechanical system stops the machine from operating without water, avoiding possible damage.
The body of the machine is made entirely of polished stainless steel, without any visible plastic parts. The appearance is modern, functional, and professional. 
The upper portion of the machine features a removable cup warmer tray in polished stainless steel, which is heated and ventilated by induction.

Electronic control version of the Nemox Pro machines are also available with the following functions:
Pre-infusion: can be started or stopped from the control panel, resulting in a better extraction of the espresso coffee by soaking the ground coffee or the pod/capsule with water before the start of the full extraction.  By using this feature, the pressurized water does not rush through only part of the coffee grounds, but thoroughly soaks and utilizes the full coffee dose, resulting in a richer extraction.
Coffee Dispensing: the first two buttons on the control panel allow you to dispense different amounts of coffee, and the third button can be utilized for continuous supply of coffee. 
The amount of coffee dispensed is controlled by a volumetric meter which can be programmed by the user. Although the brew operation will stop automatically when the preset amount has been reached, it is still possible to interrupt the flow of coffee at any time by simply pressing the same button.  A double serving of coffee can be readily obtained by pressing the button twice. 
Water level indicator: the control panel has a low-water-level light indicator that is activated before the water tank is empty.  After completing dispensing, the Nemox Pro will stop functioning, and will only resume operation once the water tank has been refilled.

Machine heating up time 2'
Brass boiler 1
Boiler capacity 200cc
Stainless steel heating element 800W
Coffee thermostat 95 C -203 F
Safety termofuse 152 C-306F
Coffee punp max. pressure 20 bar
Solenoid valve for coffee, water steam  2
Alluminium thermoblock for steam  no
Steam thermostat no
Safety termofuse no
Steam pump- max. pressure no
Water Tank 2 L - 2QUARTS
Low water light *
Hot water spout *
Automatic milk frother no
Chrome-plated brass filter holder for pods MOD. M200
Chrome-plated brass filter holder for capsules MOD. K200
Chrome-plated brass filter holder for ground coffee MOD. P200
One or two cups filter MOD. P200
Ground coffee optional kit
 MOD. M200
Stainless steel body *
Stainless steel removable cups heater *
Adjustable feet *
Machine weight 10 KG
Machine dimensions 22X33X43 CM
Power 230V 50Hz- 220V 60Hz 1Phase , 120V 60Hz 850W
Accessories Included: 
Scale filter 1